WEBER (SAINT – GOBAIN) – TILE JOINT FILLERS – WEBER JOINT POXY(RESIN & HARDENER) & WEBER JOINT POXYFILL(FILLER)

Description

Product Description
weberjoint poxy resin and hardener kit can be mixed with any colored filler to form an epoxy system which is 100% solid, reaction resin based, impervious suitable for applications on all types of tiles and stones. When mixed as per instructions, it forms to a smooth, creamy easy-toapply consistency which on final setting delivers high mechanical strength, impact and abrasion resistance. It is also recommended for hygiene sensitive areas requiring sterile conditions, stain and chemical resistance. Weberjoint poxy can be used as a heavy duty grout. It is easily water cleanable as per ISO 13007, Part 4 & ANSI 118.3.
Features & Benefits
• Easy-to-use with superior workability & water clean ability.
• Non sagging properties for ease of application in walls & floors. Resistance to stains & chemicals.
• Very low water absorption.
• Early flexural properties.
• For grout joints between 2 mm-14 mm.
• High resistance to abrasion.
• High Compressive strength.
• Very low shrinkage exceeds international standards.
• Hygienic in service & would not support bacterial growth.
• Low VOC – Over curing full reaction takes place.

Limitations
• Suitable for joint widths between 2 mm & 14 mm

• weberjoint poxy application should not be done in excessive heat. After full curing weber epoxy would resist temperatures between
(0°C – 80°C.)
• When weberjoint poxy is used on exterior installations, color variations may occur over time especially with lighter shades due to
ultra violet rays or environmental contaminants.

• Please ensure compatibility of the tiles/ stones with the pigmented filler mixed with the epoxy kit.

• Please refer to the methodology of application section and the literature of the tile/stone manufacturer taking suitable precaution. It is always advisable to test a small sample area before grouting the entire area.

Packaging – 01 KG, 05 KG & 20 KG

Support – Floor & Wall

Colours – 40 Multicolours

Physical State – (Part A – Colorless Resin & Part B – Straw Colored Hardener)