WEBER (SAINT – GOBAIN) – TILE JOINT FILLERS – WEBEREPOX EASY

Description

Product Description :-
Weberepox easy is a two component, easy to use, epoxy based tile adhesive and grout. It is suitable for all types of tiles and stones on the floor and wall. It is especially recommended for hygiene sensitive areas and also areas which require sterile conditions. When components of weberepox easy are mixed, it forms a smooth, creamy & thixotropic paste, which makes it easy to mix, easy to apply, easy to clean, and
easy to maintain. At the same time, it also provides high mechanical and chemical resistance properties. The resultant is, an easy to use, high durability grout, which is available in an attractive range of colors.
Features & Benefits
• For grout joints between 2 mm – 12 mm.
• Easy to mix, creamy consistency high productivity grout.
• Can be applied on wall and floor.
• Highly thixotropic – non – sag formula can be used as both grout and adhesive on floor & wall.
• Easy to apply
• Early flexural properties
• High resistance to abrasion
• High Compressive strength
• Low water absorption results in watertight joints
• Resistance to stain & chemicals.
• Hygienic in service & would not allow bacterial growth
• Low VOC – Over curing full reaction takes place.
• Available in 12 widely used colors.

Limitations
• Suitable for joint widths between 2 mm & 12 mm.
• Epoxy grout applications should not be done in excessive heat. After full curing weberepox easy would resist temperatures between (0C – 800C.)
• When weberepox easy used on exterior installations, color variations may occur over time, especially with lighter shades due to ultra violet rays or environmental contaminants.
• Please ensure compatibility of the tiles/stones with the mixed material. Please refer to the methodology of application section and the literature of the tile/stone manufacturer taking suitable precaution. It is always advisable to test a small sample area before grouting the entire area.

Packaging
5 kg bucket containing both Component A (Resin) – 4 kg and Component B (Hardener) – 1 kg.

Support – Floor & Wall